9 Gauge Hot dipped Galvanized Brick Construction Masonry Wall Reinforced Mesh
Masonry wall reinforced mesh, also called masonry mesh, is used for concrete constructions to strengthen the structure. It is widely used in concrete wall reinforcing to prevent or reduce the cracking of the wall. And our products can increase the strength of your wall without increasing the thickness. Our masonry wall reinforced mesh with high tensile strength and good tenacity can be bent without damaged. T shaped masonry wall reinforced mesh is suitable for corner construction. In addition, our masonry mesh products with galvanized surface treatment are not easy to be corroded and rusted in the concrete constructions. It has long service life.
We provide ladder mesh, truss mesh and T shape masonry mesh mainly. We also have expanded metal mesh as masonry wall reinforced mesh.
Product Specification
Table 1: Masonry Wall Reinforced Mesh Specifications | Item | Standard Length | Width | Finishes |
| WRMS-1 | 10' (3.05 m) | 2" (50 mm) | Uncoated
Electro Galvanized
Hot Dipped Galvanized
After Fabrication
Stainless Steel |
| WRMS-2 | 4" (100 mm) |
| WRMS-3 | 6" (150 mm) |
| WRMS-4 | 8" (200 mm) |
| WRMS-5 | 10" (250 mm) |
All ladder mesh products conform to:
ASTM A641 - (Electro galvanized )
ASTM A153 Class B2 - (Hot dipped after fabrication)
ASTM A 82 - (Cold drawn steel wire)
Tensile Strength:80,000 PSI;Yield Point:70,000 PSI minimum; Reduction of Area:30 %.
ASTM A951-96 - (Masonry wall reinforcing)
ASTM 580 Type 304 - (Stainless steel)
Ladder mesh reinforcement also called Brick Wall Reinforcement Mesh is welded wire sheet for reinforced masonry construction. It is used in building surface, wall, ground, bridge, bank and airport. And its feature is that welding spots of warp wire and weft wire are on the same surface.
Wire Diameter: 2.5-6.0 mm
Width: 5cm-27cm
Length: 3mm.
Spacing: 40cm
Surface Treatment of Ladder Mesh: Can be divided into five types:
Welded after hot dipped galvanized;
Welded after electro galvanized;
Welded before electro galvanized;
Welded before hot dipped galvanized;
Welded by stainless steel wire.
General Technical Information:
Weight: 2kg-10kg.
Usage: Masonry wall construction.
Materials Available: hot dipped galvanized steel, electro galvanized steel or stainless steel. Wire diameter: from 2.5mm to 6mm.
Truss Mesh Structure Width: 5cm, 10cm, 15cm, 20cm.
Structure Length: 3mm.
Wire Spacing: 40cm.
PACKING INFORMATION:
- Packed 500' per bundle (50 pcs - 10' long)
- Corners and Tees packed 25 pcs per bundle
Benefits:
- Greatly reduces cracking that can arise from thermal stresses. This enhances resistance to water penetration, as cracks are controlled
- Increases lateral flexural strength
- Bonds exterior and interior masonry wythes together in composite or cavity walls. Also bonds masonry at intersecting walls and corners
- Increases elasticity and performance of masonry walls under various stresses
Features:
- Butt-welding of cross rods to longitudinal rods (not more than 16”o.c.). This construction enhances bonding capabilities, eliminates projection of cross rods beyond the specified width of reinforcement, and prevents excessive build up of wire in limited mortar joints
- Continuous deformation along each longitudinal rod for superior bonding performance
- Fabricated in conformance with ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951
Application:
Various types masonry wall reinforced mesh can be used in the wall, corner of wall, and any parts to make it become more stable.
| 
Block Ladder Mesh-BLM001 | 
Block Ladder Mesh-BLM002 |
| 
Block Ladder Mesh-BLM003 | 
Block Ladder Mesh-BLM004 |
| 
Brick Wall Reinforcement Mesh-BWRM001 | 
Brick Wall Reinforcement Mesh-BWRM002 |
| 
Brick Wall Reinforcement Mesh-BWRM003 | 
Brick Wall Reinforcement Mesh-BWRM004 |
Product Tags:
|
|
Brick Construction Masonry Wall Reinforced Mesh 9 Gauge Hot Dipped Galvanized Images
|
